Exterior Set 150ml

Exterior Set 150ml

BadBoys Shampoo | Orangeade 150ml
Concentrated product for regular washing of vehicles with a fantastic orangeade fragrance. Very efficient, neutral pH.
High foaming formula guarantees high dirt removal efficiency. Leaves no traces. Safe for wax and ceramic coatings.

Product characteristics:

hand washing shampoo

efficient and highly foaming

orangeade fragrance

safe for paint, rims, gaskets, glass

safe for wax and ceramic coatings

it features a component that prevents the formation of the so-called water spots (lime deposits of hard water)

neutral pH

if applied as recommended, it is safe for cleaned surfaces

Usage:

Perform non-contact prewash using active foam or prewash (TFR)

prepare the solution by mixing the shampoo with water, with 25 ml of shampoo per 10 l of water

we recommend ‘two bucket’ washing, starting from the roof, heading downwards using a RRC wool glove and buckets with separator

rinse the vehicle with water (preferably under pressure) to remove any remaining dirt and debris

for a better effect, treat the paintwork with Quick Detailer shining preparation

Recommendations:

the shampoo’s ‘creamy foam’ effect can only be achieved by mixing it with water using a pressure washer (pour the shampoo into a bucket and then the pressurised water)

before application, make sure that the surface to be cleaned is cool, do not wash car in direct sunlight

store in a dry and cool place at 5-25C

do not expose to freezing or overheating

do not leave to dry out

keep out of reach of children

BadBoys Quick Detailer 150ml

Preparation for instant shine and protection of car paint. It gives the surface a deep shine, slippery and hydrophobic effect. It masks micro scratches, causing the surface to stay clean for longer. A product with a pleasant fragrance.

Product characteristics:

ideal for shiny car paintwork

for use on cars with sterile paintwork as well as waxes and coatings

fills microscratches and cavities on painted surfaces

brings out the depth of colour from the painted elements

forms a hydrophobic or water repellent coating

the product can be applied on both, dry and wet lacquer

Quick Detailer is also suitable as a lubricant for clay

safe for cleaned surfaces, if applied as recommended

preparation is ready to use and does not require dilution

Usage:

before applying Quick Detailer paintwork shining preparation, it is recommended to thoroughly prewash the vehicle

wet application of Quick Detailer: spray the product with about 20 ml, rinse the excess and dry the surface with a towel; do not allow to dry!

application to dry paintwork: use two soft microfibre towels, spray the agent onto the microfibre and rub into the surface, with a second microfibre wipe off the excess of Quick Detailer to achieve shine. Recommended quantity per car: 10-30 ml.

apply the product element by element

overlapping too much product results in smudges

Recommendations:

store in a dry and cool place at 5-25C

do not expose to freezing or overheating

before application, make sure that the surface is clean and cool

do not apply in direct sunlight and when exposed to wind!

keep out of reach of children

BadBoys Wheel Cleaner Bleeding 150ml
Product used for cleaning rims. Effectively penetrates dirt. The product strongly reacts with metallic deposits, which results in an intense, bloody shade of gel. Recommended for heavily soiled rims.

Product characteristics:

product dedicated to rim cleaning

gel formula allows for longer dirt penetration and slower evaporation

on contact with metal particles, it turns to a very bloody colour

the product adheres to the wheel surface in the form of an even gel glaze, which makes it flow off the surface longer.

safe pH

ready to use

safe for cleaned surfaces, if applied as recommended

neutralised odour (characteristic of other such products)

Usage:

shake the bottle before use

spray rims generously with the gel

for a better effect, use a brush to separate the dirt

for dirt that is difficult to remove allow the agent to act on the surface for several minutes

rinse with water, preferably under pressure

dry the surface with compressed air or clean microfibre for a perfect finish

if necessary, repeat the above steps

Recommendations:

before first use, test the product in a less visible place

protect your skin during application; the product may cause skin irritation;

store in a dry and cool place at 10-25C

do not expose to freezing or overheating

do not leave to dry out

before application, make sure that the surface to be cleaned is cool, do not use in direct sunlight

keep out of reach of children