Akrapovic Porsche 911 GT3 / GT3 Touring (992) Slip-On Race Line S-PO/TI/23

Akrapovič Slip-On Race Line (Titanium) | 911 GT3 / GT3 Touring (992)

The housing of the exhaust valves – which have been tailored perfectly to the gas flow to produce a smooth, rich tone at normal cruising and a sporty sound experience at higher revs – and the collectors in the muffler are cast in the Akrapovič in-house foundry. When combining the Slip-On Race Line (Titanium) with the Slip-On Race Line Adapter (SS), the weight is decreased by 20.7% (3.5 kg) against the standard system and performance sees an increase of 10.4 kW (14.1 hp) in power at 2,600 rpm and a torque rise of 38.1 Nm at 2,600 rpm when tested on the Akrapovič dyno against a Porsche 911 GT3 RS (992) with a standard stock exhaust. This system is intended for use on closed-course competition circuits only because it is a racetrack-oriented part. No remapping of the ECU is required.

This system fits also on vehicles equipped with Otto particulate filter (OPF).

If fitted with the stock headers in place, the system requires the P-CP034 Slip-On Race Line Adapter (SS) as a mandatory part for installation.

For clients intending to install the complete exhaust system, the E-PO/T/9 Evolution Header Set (Titanium) must be ordered separately.

Please notice that you may need to order new original Porsche V-clamps that fix the link pipes onto the headers, in case they are damaged during the removal of the stock exhaust.

Please note that the product shown in the pictures may present the Slip-On Race Line (Titanium) in combination with the Evolution Header Set (Titanium) or in combination with the Slip-On Race Line Adapter (SS).

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.