10270021 KW Coilover suspension V1 inox PEUGEOT 308 II (LB_, LP_, LW_, LH_, L3_) 09/2013- 1.6 BlueHDi 120

10270021 KW Coilover suspension V1 inox PEUGEOT 308 II (LB_, LP_, LW_, LH_, L3_) 09/2013- 1.6 BlueHDi 120

Lowering FA/RA (mm): 40-65/40-65

KW V1 coilovers

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit V1 is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover V1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover V1 satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers V1, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 25 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Struts in galvanized steel
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover V1 has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW V1.For more information, feel free to contact us.