10210050 KW Coilover suspension V1 inox AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 FSI
1.234,64€ WITH TAX
10210050 KW Coilover suspension V1 inox AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 FSI
Coilover suspension V1 inox
Damping adjustment: no
Approval: part approval (§19.3)
Material: Stainless steel
Content of delivery: Set FA coilover struts, RA springs with height adjustment + dampers
Version: V1
Vehicle has electronic damper: NO
Delivery time: from 7 to 20 days. Before you order the product, we suggest that you ask for the exact delivery cost and time. The product images shown are for illustration purposes only and may not be an exact representation of the product (contact us for more photos of this product).10210050 KW Coilover suspension V1 inox AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 FSI
Coilover suspension V1 inox
Damping adjustment: no
Approval: part approval (§19.3)
Material: Stainless steel
Content of delivery: Set FA coilover struts, RA springs with height adjustment + dampers
Version: V1
Vehicle has electronic damper: NO
Note (Product): For cars without electronic damping
Strut diameter front axle: 55
Lowering FA: 35-65
Lowering RA: 35-65
Adjustment FA: Thread
Adjustment RA: Thread
KW V1 coilover suspension Sportiness paired with outstanding looks. With factory-preconfigured damping. Our entry-level model for more driving pleasure through an attractive and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of spring struts made of stainless steel, corrosion-resistant springs and coordinated components, it stands for long-term driving pleasure - not just for the life of the car. Continuous lowering The KW V1 enables maximum lowering in the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimeters or 50 to 90 millimeters for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily even after years. Depending on the vehicle, the lowering is done either on the wheel-guiding KW stainless steel spring struts or, in the case of non-wheel-guiding double wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fans With its harmonious basic tuning for sporty driving on the road, the KW V1 impresses the discerning tuning fan. For each vehicle, our development engineers determine a specific damper tuning and spring rate in order to increase your driving pleasure with the optimal balance of sportiness and everyday suitability. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as large-scale manufacturers. With the KW V1, the rolling and swaying movements of the vehicle body are reduced when the suspension is compressed, so you benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasure For over 25 years, we have been the market leader and driving force for innovation as a manufacturer of individual suspension solutions for the road and in racing. No matter where in the world, sporty drivers, automobile manufacturers and refiners trust in our KW coilover suspensions "Made in Germany". Each KW coilover suspension is subjected to extensive stress tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to meet the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year guarantee on our KW coilover suspensions, which exceed original equipment manufacturer quality and cover over 4,600 applications. This is up to five years when installed by one of our KW specialist dealers. - optimally pre-set - sporty, harmonious damping technology - stainless steel technology "inox-line" - individually height-adjustable - tested adjustment range - ready-to-install complete solution - high-quality components for a long service life - complete documentation for easy handling Setup - factory-preconfigured damping setup The KW V1 has a vehicle-specific, fixed damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimal balance of sportiness and everyday usability when driving. Even with a full load and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning fans for whom the show & shine idea is the main focus.| Product manufacturer | KW |
|---|---|
| Brand | Coilovers |
| Car brand | AUDI |
| KW & ST Car Model | A3 (8P) 8P1 |
| KW & ST Car Name | 2.0 FSI |
| KW & ST Car Engine | 110kw – 1984cmm – 4cyl – Petrol – Hatchback – Front Wheel Drive |
| Car Year Start | 05/2003 |
| Car Year End | 12/2013 |
| Material | Stainless steel |
| Lowering FA/RA (mm) | 35-65/35-65 |
| Adjustment FA/RA | Thread/Thread |
| Axle Weight FA/RA (kg) | -1035/-1005 |
| KW & ST Version | V1 |
| Electronic Damper | NO |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.