DO88 Mikalor Worm drive hose clamp 60-80mm/16,5mm With inner-ring W3

This hose clamp is fitted with a stainless-steel inner-ring which is designed to give extra protection to the hose especially where it comes into contact with the underside of the clamp housing.

This clamp is particularly recommended for use on silicone hoses, which surface under the hose clamp can easily be cut/damaged when used with incorrect hose clamp.

The inner-ring fitted to this clamp prevents damage to the hose as well as distributing the pressure of the clamp evenly around the hose.

(*) It is recommended to apply up to 75% of the maximum values contained in the table.
(**) The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.

Important! To choose correct clamp size, control that the hose outer diameter is within the clamping range specified in table.